This is a noob friendly installation guide intended for people who are new to Linux or installing operating systems. If you have already installed any other Linux Distro you can likely skip this guide, but if you're having problems installing, it may still help you.
Here is some general information on installing Linux Distros that may help you understand what's about to happen. You can skip this section and just follow the "click on xy, download xyz" instructions but it may help to understand how things work and what you're doing.
To install an operating system you need a live medium. That's a fancy term for saying that you create a copy of that OS on a removable medium like a USB stick or a DVD (although those have fallen out of fashion in recent years) This copy of the OS is a special version that's non-persistent meaning that any changes you make while using it are wiped upon rebooting. It also contains an installer program that can copy the operating system to your computers disk, meaning it will be what the computer is normally running.
You then insert the live medium into the computer and boot from it, meaning that you make the computer read the data from it instead of the internal disk. Then you can play around with the live version or start the installer program to create an installation on your computer.
After the installation is finished you can shut down the computer, unplug the live medium and upon booting you be greeted with the freshly installed OS.
To install instantOS you'll need a few things. The requirements are generally really low so you're likely fine with anything you have.
- USB stick, 1.5GB or larger
- Computer to install on with
- 5GB of disk space, 8GB or more are recommended
- 64Bit processor
- An internet connection
1. Download ISO¶
Head over to https://instantos.io/download and download the latest ISO to your computer (can be any computer, does not have to be the one you plan on installing to).
2. Download etcher.io¶
Next you'll need a piece of software called etcher. it can be downloaded from https://etcher.io and like instantOS is completely free and open source. On Linux the AppImage version is recommended. Other USB burning programs may work as well, although dd has been proven to be problematic, so for the best results it is recommended to use etcher.
3. Burn the USB¶
This step will wipe the entire USB stick, so back up any data you may have on it elsewhere. After the installation the USB stick can be used to store regular files again. Begin by inserting the USB stick. Start up Etcher and choose the ISO you downloaded in step 1. Next choose the USB drive. Be sure you choose the right one because again, all data on it will be wiped. Then click "Flash" and wait until the process has finished. On windows you will need administrator rights and on Linux you will need to enter your root password. If the password prompt does not work you might be missing a polkit GUI.
4. Boot from the live medium¶
Shut down the target computer and insert the live medium. Next turn on the target computer. A lot of new computers automatically boot from a live medium if one is detected. If you see an instantOS splash screen, you are done with this step. If that's not the case for you continue with the next instruction. Most computers have a splash screen that briefly appears before continuing the booting process. It usually contains the Logo of the manufacturer. Somewhere, usually below the logo there should be a list of keys that can be pressed while the splash screen is active and a description of what they do. Look for "boot medium" or somethings similar, and if that is not there, go for "BIOS" or "setup". If you missed the key the first time around, shut the computer back down and start repeatedly pressing it as soon as it turns on. If the "boot medium" option is available you should get a menu that lists all storage devices that are plugged in. The installation medium is usually called USB flash drive or something similar. Choose that, usually using the arrow keys, newer computers might support a mouse here, and confirm using the enter key. If you don't have the boot device menu and instead have to use the bios, try looking for "boot order" and put the live medium as the first item in this list. This process can differ depending on the manufacturer.
After booting the ISO, confirm the first option in the instantOS splash screen using the enter key to enter the live session. Inside the live session you should have a welcome app with an install entry. Click on that or the applet in the top right to start the installation. This requires a constant internet access, ethernet is recommended. The installer asks a few questions and should be fairly self explanatory. You can select things using either the arrow keys, by searching for items or using the mouse. Confirm options by using the enter key or left clicking. After you input all the information the installation process will begin and the computer will automatically reboot. In case it boots into the live session again, choose "boot existing OS" and you should be ready to use instantOS. If you have any questions or need help with something, feel free to ask in any of the places listed in support